Industriewasserrohrkessel-Streifenhäuser mit einem Gewicht von 1 bis 20 Tonnen für Kraftwerke
Produktdetails
| Typ: | Natürliche Zirkulation | Struktur: | Wasserröhre |
|---|---|---|---|
| Druck: | Hochdruck | Dampferzeugung: | Max. 20 t/h |
| Stil: | Horizontal | Ausgabe: | Heißes Wasser |
| Material: | Kohlenstoffstahl, Legierungsstahl, ND -Stahl | Gewicht: | 1-20 Tonnen |
| Kraftstoff: | Kohlenbefeuert | Durchmesser (OD): | 76 mm ~ 914 mm |
| Maximale Länge: | 23000 mm | Temperatur: | 300~1500℃ |
| Verpackung: | Eisenrahmen | Kernkomponentengarantie: | 5 Jahre |
| Kesselart: | CFB-Kessel | ||
| Hervorheben |
1-20 Tonnen Kessel-Manifoldheader,mit einer Breite von mehr als 600 mm,jedoch nicht mehr als 600 mm |
||
Beschreibung des Produkts
| Parameter | Reichweite |
|---|---|
| Durchmesser (OD) | Ø76 mm bis Ø914 mm |
| Längen (maximal) | 23000 mm |
| Temperatur | 300 bis 1500°C |
Produkt-Highlights
Hochdruck-Karbon-Stahl-Gängekesselkopf für Kraftwerke, für den industriellen Gebrauch mit einer Dampferzeugung von maximal 20 t/h ausgelegt.und langlebige Kohlenstoff-/Legierstahlkonstruktionen. Einschließlich 5-jähriger Kernkomponentengarantie, Online-Nachverkaufsservice und kundenspezifische Größe (76-914mm OD).
Hochdruck-Kessel Heizung Oberflächen Membranwand Argonbogen Schweißen für Biomasse-Kessel
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Hochfrequente Schweiß-H-Finnen-Rohr-Ökonomizer für Kraftwerksboiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Kohlenstoffstahl SA192 Superheater Coil Argonbogen-Schweißen 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Stahlboiler Ökonomizer Wärmeaustauschteil ASME-Zertifizierung
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Bitte nutzen Sie unser Online-Anfrage-Kontaktformular unten, wenn Sie Fragen haben, unser Team wird sich so schnell wie möglich mit Ihnen in Verbindung setzen.
