High Efficiency 92.4%--94.5% Thermal Boiler Fin Tube with Special Boiler Steel Plate for Gas, Oil, Coal
Produktdetails
| Typ: | Natürliche Zirkulation | Struktur: | Wasserröhre |
|---|---|---|---|
| Druck: | Hochdruck | Dampferzeugung: | Max. 20 t/h |
| Stil: | Horizontal | Ausgabe: | Heißes Wasser |
| Material: | Spezielle Stahlplatte für Kessel | Kraftstofftyp: | Gas, Öl, Kohle |
| Arbeitsdruck: | Hoch- Niederdruck | Entwurfsbrennstoff: | Kohlebrennstoff |
| Wärmeeffizienz: | 92,4 %–94,5 % | Gewicht: | 5 bis 50 Tonnen |
| Überdosierung des Basisrohrs: | 25,4 ~1600 mm | Basisrohrdicke: | 2,5 ~ 40 mm |
| Flossenhöhe: | 0,5 ~ 20,0 mm | ||
| Hervorheben |
High Efficiency Boiler Fin Tube,Special Boiler Steel Plate H-fin Tube,Gas Oil Coal Spiral Fin Tube |
||
Beschreibung des Produkts
H-fin Tubes feature two steel discs with fluorescent tubes symmetrically welded together to form fins (butterfly piece fins), creating an H-shaped profile that delivers efficient energy savings and extended heating surface area. These tubes offer high fusion weld rates and exceptional weld tensile strength. When assembled with H economizers, they provide high efficiency, low resistance, minimal wear, and lightweight construction.
| Item | Base Tube O.D (mm) | Base Tube Thickness (mm) | Fin Height (mm) | Fin Thickness (mm) | Fin Pitch (mm) |
|---|---|---|---|---|---|
| Range | 25.4 ~1600mm | 2.5 ~40 mm | 0.5 ~20.0 mm | 0.5 ~3.0 mm | 5 ~ 25.4 mm |
| Material | Carbon Steel, Alloy Steel, Stainless Steel | ||||
| Length | 0＜L＜12000mm | ||||
| Product | H-fin Tube |
| Base Pipe | Welded or Seamless |
| Material | Carbon steel, alloy steel, stainless steel, non-ferrous alloys and nickel alloys |
| Application | H economizer, H evaporator, H superheater, H air heater and similar systems |
Please feel free to contact us for any questions or requirements.
Produkt-Highlights
High/Low Pressure Spiral Stainless Boiler Fin Tube for Heat Exchanger Product Description H-fin Tubes feature two steel discs with fluorescent tubes symmetrically welded together to form fins (butterfly piece fins), creating an H-shaped profile that delivers efficient energy savings and extended ...
Hochdruck-Kessel Heizung Oberflächen Membranwand Argonbogen Schweißen für Biomasse-Kessel
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Hochfrequente Schweiß-H-Finnen-Rohr-Ökonomizer für Kraftwerksboiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Kohlenstoffstahl SA192 Superheater Coil Argonbogen-Schweißen 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Stahlboiler Ökonomizer Wärmeaustauschteil ASME-Zertifizierung
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Bitte nutzen Sie unser Online-Anfrage-Kontaktformular unten, wenn Sie Fragen haben, unser Team wird sich so schnell wie möglich mit Ihnen in Verbindung setzen.
