Flue Gas Boiler Economizer Heat Exchanger with Max 120t/h Steam Production and 1 Year Warranty
Produktdetails
| Typ: | Natürliche Zirkulation | Struktur: | Feuerrohr und Wasserrohr |
|---|---|---|---|
| Druck: | Niedrig/Hochdruck | Dampferzeugung: | Max. 120T/h |
| Stil: | Vertikal | Kraftstoff: | Kohle / Gas / Kohle / Wasserspeise |
| Ausgabe: | Heißwasser/Dampf | Material: | Kohlenstoffstahl, Edelstahl, Legierungsstahl |
| Gewichtsbereich: | Min: 10 Tonnen max.:1000 Tonne | Schmelzverfahren: | EF+LF + VD |
| Verfahren: | Material-> INGOT -> HOT/KALD -ROLLING-> WEDERBEHANDLUNG (Normalisierung+ Temperatur) -> | UT-Standard: | ASTM A388 oder EN10228 |
| Materialstandard: | ASTM, EN oder ISO | Wärmetauschertyp: | Economizer H-Finned Tube, Spiral Finned Tube Economizer, Bare Tube Economizer |
| Rauchgasfluss: | Erhöhte Fläche, reduzierte Geschwindigkeit | ||
| Hervorheben |
Flue Gas Boiler Economizer,Max 120t/h Steam Production Heat Exchanger,1 Year Warranty Finned Tube Economizer |
||
Beschreibung des Produkts
Boiler economizers are heat exchange devices with finned tubes that heat liquids (typically water) to temperatures approaching but not exceeding the liquid's boiling point.
We manufacture three types of boiler economizers:
- Bare tube economizer
- H finned tube economizer
- Spiral finned tube economizer
The H-finned tube economizer is a high-efficiency heat exchanger consisting of H-finned tubes. Compared to bare tube economizers, H-finned tube models offer:
- Larger heat exchange area
- Reduced number of tubes required
- Increased flue gas flow area
- Reduced flue gas flow speed and abrasion
H-finned tubes can be manufactured as double H finned tubes for enhanced rigidity in long tube row applications. The spiral finned economizer features newly designed heat transfer equipment with spiral fin tubes to overcome abrasion issues and extend service life.
| Description | Boiler economizer |
|---|---|
| Material | Alloy steel, Carbon steel, SA210C, SA213T22, etc. |
| Material standard | ASTM, EN or ISO etc. |
| Dimension | Customization |
| Weight | Min: 10 ton Max.:1000 ton |
| Smelting Process | EF+LF + VD |
| Process | Material->Ingot -> Hot/Cold-Rolling-> Heat treatment (Normalizing+ tempering) -> Inspection ->rough machining->UT ->2nd Heat treatment ->finishing machining ->Inspection |
| UT standard | ASTM A388 or EN10228, etc |
- Impact test and Strength calculation report with applied materials information
- 100%NDT(non-destructive inspection) report of steel plate, tube and electrode
- X-ray, γ-ray and liquid penetrant test inspection report (welding seam) to ensure the quality of the entire boiler
- Hydraulic test report to ensure standard working pressure and safety
Produkt-Highlights
Flue Gas Boiler Economizer Heat Exchanger Devices With Finned Tubes Product Description Boiler economizers are heat exchange devices with finned tubes that heat liquids (typically water) to temperatures approaching but not exceeding the liquid's boiling point. Introduction We manufacture three types ...
Hochdruck-Kessel Heizung Oberflächen Membranwand Argonbogen Schweißen für Biomasse-Kessel
High Pressure Power Boiler Heating Surface Membrane Wall Argon Arc Welding For Biomass Boiler Product Introduction Water wall panels with pins usually laid vertically on the inner wall of the furnace wall, it is mainly used to absorb the radiant heat emitted by the flame and high-temperature flue gas in the furnace.It is the main type of evaporating heating surface of all kinds of modern boilers and the basic component of boiler water circulation loop.Because of both cooling
Hochfrequente Schweiß-H-Finnen-Rohr-Ökonomizer für Kraftwerksboiler ASME
High Frequency Welding H Fin Tube Economizer For Power Plant Boiler ASME Product Description The boiler economizer is a device used to recover waste heat in industrial boilers, usually located at the tail of the flue of the boiler, which increases the feed water temperature and reduces fuel consumption by absorbing the heat of the flue gas, so as to achieve the effect of energy saving and emission reduction. But at the same time, as an environmental protection equipment, the
Kohlenstoffstahl SA192 Superheater Coil Argonbogen-Schweißen 100% PT
Product Description: A boiler superheater is an essential component in a boiler system, responsible for increasing the temperature of steam produced by the boiler. One of the key products in this category is the Superheater Coil, designed to enhance the efficiency and performance of boiler systems. This particular superheater is suitable for various fuels, including coal, oil, and biomass, making it versatile and adaptable to different energy sources. The Superheater Coil
Boiler Industrial SA210A1 Stahlboiler Ökonomizer Wärmeaustauschteil ASME-Zertifizierung
Boiler Industrial SA210A1 Steel Boiler Economizer Heat Exchange Part ASME Certification Introduction The H-shaped finned tube is also known as the H-shaped fin tube, also known as the butterfly fin tube. It is to weld symmetrically two pieces of steel with an arc in the middle to form fins (ribs or butterflies), the frontal shape of which resembles the letter "H", so it is called the H-shaped finned tube. The two fins of the H-shaped fin tube are rectangular and approximately
Bitte nutzen Sie unser Online-Anfrage-Kontaktformular unten, wenn Sie Fragen haben, unser Team wird sich so schnell wie möglich mit Ihnen in Verbindung setzen.
